Monday, October 16, 2017

DIY String Art Tutorial for the Classroom



When I started to see string art in home décor stores, I knew I wanted to create a custom piece for my classroom! I'm a novice at crafting, so bear this in mind as you read the post: if I can do it, you can do it!


Supplies:

I snagged most of these supplies at Walmart. Here's the list:

1. Embroidery Thread: $2.28
2. Stencils: $3.47
3. Nails: $0.97
4. Spray Paint: $1.00
5. Wooden Board (Lowe's): approx. $3.00 (I forgot to keep the receipt - oops!) 


I measured the board and placed the letters in the center. Watch out for the spacing! I had to re-do a couple letters because I didn't space them out evenly when I started. All it took was a little erasing - an easy fix.


After tracing the letters it was time to add the nails. Originally, I spaced the nails about an inch apart (see the picture above). I realized that I wanted the thread to really fill up the inside of the letters so I added more nails after the picture was taken. You can see the difference in the picture below.


I read some tutorials online that suggested painting the board before starting the project. I wanted to paint the nails, too, so I opted to spray paint the entire project at one time. It took a few coats of spray paint to cover the wood but I LOVE the end result.


Once the paint has dried, it's time to start the tedious (but gratifying!) process of attaching the string to the nails. I chose a nail on the outside corner of a letter and tied a knot. I left quite a long "tail" on the knot because I'll be tying a couple more knots to it and didn't want to be fumbling with a tiny piece of string later. We'll cut off the extra string at the end of the project.  


Next, wrap the string around the outside of the next nail. By wrapping the entirety of the outside of the letter first, you'll create a nice clean edge.


Keep the string pulled tight as you continue wrapping it around the nails on the outside edge of the letter. If you don't keep the string pulled tightly, it has a tendency to pop off the nails. It happened to me a couple times. It's a bit annoying but a great reminder to always keep a watch on that string!


Continue the process until the outside of the letter is wrapped with string. Tie a knot back at the first nail. Then fill in the center of the letter by wrapping the string around the nails! There's no particular way to wrap the string. I just kept wrapping it around the nails until I got the look I wanted. Once I was finished, I made sure to end at the nail with the knot, tying one last knot to finish up the letter.


This part of the project is my favorite - seeing everything come together so beautifully! I love how the color pops off the white background. Once all the letters are complete, take your scissors and cut off all the extra hanging strings.


Ta Da! I LOVE the finished string art project and can't wait to place it in my classroom! I'll probably attach two little hooks to the back to hang it on the wall.

If you make string art for your classroom, I'd love to see it! Share it with me via email at theteachersprep@gmail.com or on Instagram: @teachersprep. :)

2 comments:

  1. Love string art most. This string art DIY tutorial you posted is so clear to follow.

    ReplyDelete
    Replies
    1. Thanks, Joanna! I hope you have fun creating your own string art. :)

      Delete